In most cases, fluid lubrication is limited to the boundary area, and direct friction caused by metal contact is unavoidable. In this friction, a large amount of energy is wasted as friction loss.
In most cases, grease lubrication is sufficient, which makes it particularly easy to rotate the micro clearance or negative clearance between the sliding block and the guide rail of the linear guide rail in terms of the lubrication system planning, use and maintenance of the machine tool, thus greatly improving the overall rigidity and dynamic accuracy of the guide rail. It can be used under special circumstances such as dust, bad weather and water.
The self lubricating module can not only increase the convenience of user maintenance, but also enable customers to directly purchase the self lubricating module kit and place it on the sliding block, thus achieving the effect of lubricating parts. The machine plans to receive the deviation of the placement surface due to the elastic deformation of the steel ball in the rotating linear guide rail, so as to lower the flatness request of the guide rail placement root surface and reduce the machining cost. The linear guide rail has the characteristics of receiving after averaging the straightening deviation such as perpendicularity, flatness, and intersection generated during the processing and assembly of the substrate of the placement guide rail. Therefore, the adoption of linear guides can greatly improve the effectiveness of the machine plan.
The friction loss of the rolling surface is also reduced accordingly, so the linear rolling guide system can be kept in a high-precision state for a long time.
