PGH Planetary Gearbox 060-180 Single Two Stage
Overview
PGH series planetary gearboxes are the high-torque end of our reducer range. Four frame sizes - 060, 115, 142 and 180 - take servo and stepper inputs through a single-stage (L1) or two-stage (L2) planetary train, with rated output torque up to several hundred N·m in the 115 frame. Backlash is selectable, so the same gearbox can serve a woodworking router or a positioning axis that needs arc-minute precision.
Frame range
| Frame | Stages | Typical use |
|---|---|---|
| PGH060 | L1 / L2 | NEMA 17–23 stepper and 400 W servo axes |
| PGH115 | L1 / L2 | 750 W–2 kW servo, gantry and rotary axes |
| PGH142 | L1 / L2 | 2–3 kW servo, heavy Z axes |
| PGH180 | L1 / L2 | 3 kW and above, press and indexing drives |
PGH115-L1 rated torque by ratio
Figures below are from the PGH115 single-stage drawing, standard 32 mm output shaft version. Failure-stop torque is three times the rated value.
| Ratio i | 3 | 4 | 5 | 7 | 10 |
|---|---|---|---|---|---|
| Rated output torque (N·m) | 290 | 300 | 290 | 270 | 220 |
Allowable radial load 3 420 N, allowable axial load 2 650 N, unit weight 8.7 kg.

Series specifications
| Item | Value |
|---|---|
| Full-load efficiency | 97% (single stage) |
| Rated input speed | 4 000 rpm |
| Maximum input speed | 8 000 rpm |
| Backlash class | P0 ≤ 1 arcmin, P1 ≤ 3 arcmin, P2 ≤ 5 arcmin |
| Lubrication | Synthetic grease, life-lubricated |
| Mounting | Any orientation |
| Operating temperature | -10 °C to +90 °C |
| Average service life | 20 000 h |
How to size a PGH
Work backwards from the load: torque at the output shaft, divided by the ratio, gives the torque the motor must supply - keep it under 80% of motor rated torque so acceleration does not trip the drive. Then check radial load on the shaft (belt and pinion drives load it far more than a coupled shaft) and pick the frame that carries it. If the axis is a positioning axis, choose P1 or P0 backlash; if it is a conveyor or a fan, P2 is enough.
Typical applications
Gantry and Z-axis drives on routers, rotary fourth axes, tool changers, packaging indexers, servo press feeds, and any place a stepper needs more torque than its frame can give.
FAQ
Can PGH replace an HPS gearbox? Both are planetary, but the frame and flange dimensions differ. Match the drawing before swapping - the motor pilot diameter is usually what decides it.
Is the gearbox lubricated for life? Yes. Synthetic grease, no oil change, but the unit should not be opened.
How do I read the model code? Frame size first (060 to 180), then stage count (L1 or L2), then the input bore and output flange dimensions for that build.
Do you supply the matching pinion or timing pulley? No, the gearbox ships as a bare unit; the input bore and keyway are machined to the motor shaft you specify.
Related products
Pair with our planetary reducer range for lower torque axes, HPS90MA for NEMA 23 builds, and servo motors to complete the axis.
Hot Tags: pgh planetary gearbox, servo planetary reducer, low backlash gearbox, inline planetary gear reducer, nema 34 reducer, reducer for granular material conveyor, reducer for inventory conveyor, reducer for non hazardous material conveyor, reducer for supply chain conveyor
Previous
No InformationYou Might Also Like
Send Inquiry












