GDZ-100-3.7 Water Cooled Spindle 3.7 KW ER20
video

GDZ-100-3.7 Water Cooled Spindle 3.7 KW ER20

3.7 kW water cooled round spindle in a 100 mm body with ER20 collet. Runs on single-phase 220 V at 13 A, 24000 rpm at 400 Hz, 10.0 kg gross.
Send Inquiry
Add To Inquiry
Product Introduction

Overview

The GDZ-100-3.7 is a 3.7 kW water cooled round spindle built in a 100 mm body with an ER20 collet. It sits between the 2.2 kW spindles used on hobby and light production routers and the 5.5 kW units that need a 380 V supply - 3.7 kW still runs on single-phase 220 V, which is why it is common in workshops without three-phase power.

Specifications

Item Value
Model number GDZ-100-3.7 Φ100×260
Power 3.7 kW
Voltage 220 V
Current 13 A
Frequency 1–400 Hz
Speed 1–24 000 rpm
Collet ER20
Body diameter 100 mm
Cooling Water cooling
Gross weight 10.0 kg

GDZ-100-3.7 water cooled spindle detail

What 3.7 kW buys you

Compared with a 2.2 kW spindle, the extra 1.5 kW shows up as deeper cuts in hardwood and MDF rather than higher feed rates - the spindle holds rpm under load instead of bogging down. If your cuts are already light and fast, 2.2 kW is the more economical choice; 3.7 kW pays off on solid wood, plastics that melt under slow passes, and jobs where a single 12 mm cutter removes a lot of material.

Cooling and installation

Water cooling keeps the stator at a stable temperature during long shifts and is quieter than an air cooled unit of the same power. Plan a pump, a reservoir of at least 20 litres, and a flow path that lets air out of the jacket before the first run. The 100 mm clamp fits standard 100 mm spindle brackets; check that your Z plate clears the 260 mm body plus the collet nut and wrench.

Matching VFD

Use a 4 kW class VFD rated for single-phase 220 V input, set to 400 Hz maximum and 24 000 rpm. Our HS320 series covers this power range; set the motor nameplate current (13 A) as the overload reference rather than the default.

FAQ

Can it run on 380 V? No. This model is 220 V only - the 5.5 kW version is the 380 V option.

What is the largest cutter? ER20 takes up to a 13 mm shank; keep the tool overhang short on deep cuts.

Does it include the pump? No, the spindle ships on its own. Pumps and hose kits are quoted separately.

How often should the water be changed? Every two to three months, or sooner if the water turns cloudy - debris in the jacket reduces flow and shortens bearing life.

Related products

Compare with the STZ 0.8–2.2 kW water cooled range, step up to the GDZ-125-5.5 for three-phase work, or pair with our HS320 VFD.

Hot Tags: 3.7kw water cooled spindle, ER20 spindle motor, 220V CNC spindle, 1 5 kw vfd spindle, 20 hp variable frequency drive, 2kw vfd, frequency converter vfd, spindle motor atc, vfd 5 hp

Send Inquiry

whatsapp

Phone

E-mail

Inquiry