GDZ-65-0.8 Water Cooled Spindle Kit 0.8 kW ER11
This is the 0.8 kW water cooled spindle kit: a GDZ-65-0.8 spindle in a 65 mm body with an ER11 collet, supplied with the HS320 drive, the mounting bracket, the pump and the water tubing. It runs to 24000 rpm at 400 Hz on 220 V at 1.9 A.
Overview
Buying a spindle and a drive separately means matching three things yourself: the voltage, the rated current, and the frequency range the drive has to reach. A kit takes that out of the job. The HS320 in this set is already set up for a 400 Hz, 24000 rpm spindle rated at 1.9 A, and the pump and tubing match the jacket on a 65 mm body.
The 65 mm body is the compact end of the range. It suits a small gantry, a desktop router or an engraving machine where the Z axis has little room and the work is signage, plastics, PCB or light wood. The ER11 nose takes tools to 7 mm.
Specifications
| Spindle model | GDZ-65-0.8(4), 65 800W ER11 |
| Power | 0.8 kW |
| Speed | 1000 - 24000 rpm |
| Frequency | up to 400 Hz |
| Voltage | 220 V |
| Current | 1.9 A |
| Collet | ER11, nose M14×0.75, shanks up to 7 mm |
| Spanner flat | S = 13 mm |
| Body diameter | Ø65 mm |
| Body length | 197 mm (28.5 mm nose, 5 mm flange face) |
| Cooling | Water cooled |
| Lubrication | Grease |
| Drive included | HS320 VFD |
What is in the box
The kit ships as the set shown in the photograph: the GDZ-65-0.8 spindle, the HS320 variable frequency drive, the mounting bracket that clamps the 65 mm body, a water pump, the tubing for the circuit, an ER11 collet set and the spindle connector. Everything that has to match between the spindle and the drive is already matched before it leaves here.
What you still provide is the machine side: a 220 V supply, a reservoir for the pump, and the bracket fixing to your Z plate.
What 0.8 kW buys you
0.8 kW at 24000 rpm is an engraving and light-cutting budget: 3.175 mm and 6 mm tools in acrylic, PVC, foam, PCB and softwood, at feed rates a small machine can actually hold. It is the entry point of the range, not a production spindle for aluminium.
If you need to cut aluminium or run a 12 mm cutter, step up to the 100 mm bodies. This kit exists for the machine that is already built around a 65 mm clamp.
Cooling and installation
Fill the jacket from the lower port on the rear cap, vent the loop before the first cut, and keep the flow continuous while the spindle runs. The pump in the kit is sized for this body; a longer hose run than the one supplied will need a larger pump.
Wire the spindle to the drive output, never to the mains. Set the HS320 to the spindle's rated current (1.9 A) and to the 400 Hz top frequency, then check the direction of rotation before mounting a tool.
Matching and spares
The HS320 in the kit also runs our larger water cooled bodies up to 7.5 kW, so the drive does not become redundant when you add a second spindle on the same machine. Single drives are listed on the HS320 / HS321 VFD page, and spare collets and nuts on the spindle collet page.
FAQ
Is the drive configured for this spindle?
Yes. The HS320 leaves here set for a 400 Hz, 1.9 A spindle. Check the parameters against the spindle label on arrival before the first run.
Can I buy the spindle on its own?
Yes. The same GDZ-65-0.8 body is available without the drive, pump and bracket - ask for it as a spindle-only line on the quotation.
Will the bracket fit my machine?
The bracket clamps a Ø65 mm body. If your Z plate already has holes for a different clamp, send the hole pattern and we will confirm before shipping.
Can it run on 380 V?
No. This spindle is 220 V at 1.9 A. The larger bodies in the range are made in both windings.
Related products
GDZ80-1.5C water cooled spindle 1.5 kW · GDZ80-2.0 water cooled spindle 2.0 kW · GDZ100-3 water cooled spindle 3.0 kW · Spindle dust shoe · Ask for a quotation
Hot Tags: 0.8kw water cooled spindle kit,GDZ-65 spindle,ER11 spindle kit,HS320 VFD spindle kit, 110v air cooled spindle, adjustable frequency ac drive, single phase frequency drive, spindle motor 800w, vfd for turning operations, water cooled cnc spindle
Previous
No InformationYou Might Also Like
Send Inquiry















