Electric Oil Pump
Details:
Our oil pumps are suitable for punch presses, large boring machines, gantry milling machines, gear hobbing machines, etc. The oil pump is available in various voltages such as DC 24/36V and AC 110/220/380V, which can be customized. There are multiple models suitable for oil or grease. In most cases, a periodic lubrication system should be used. Too much and too little oil is equally harmful to the friction pair. The periodic lubrication system should be used to control the oil supply of the friction pair; the continuous lubrication system should use the control part to control the oil supply of the friction pair.
Note:
1.This machine can only be used with new oil. The viscosity of the oil of appropriate quality is approximately 32-68 CST (or 0 # -0000 #).
2. Please clean the fuel tank every two months and clean or replace the fuel filler and filter screen at the oil suction port
3. The interface of this machine is a dedicated component. Please do not replace it by yourself.







Hot Tags: electric oil pump, China electric oil pump manufacturers, suppliers, factory, cnc plastic injection molded parts, sfu1204 nut housing, cnc rubber parts, cnc aluminum parts, linear guide block, cnc reliable parts
Previous
980M Controller Machining CenterNext
Encoder E6B2You Might Also Like
Send Inquiry















