Nema 52 Stepper Motor
Introduction to motors:
1. The axle diameter of nema52 stepper motor is 24mm
2. Our stepper motors are available with and without brakes.
3. The torque of the motor with 24 N. m, 28 N. m, 37 N. m, 50 N. m, 60 N. m.
4. The matching drive has 16 kinds of subdivision micro-steps, and the maximum number of steps is 30000 steps/revolution; The working peak current range is 2.8A-10.0A, and there are 8 output currents.The driver has half current, over voltage, over current and other functions to protect the circuitThe driver is powered by AC. The recommended working range is
AC110V-220V.
Motor technical features:
Step accuracy: 5%
Ambient temperature: 80℃ Max
Insulation resistance: 500VDC100MΩMin
Withstand voltage: 500VAC1Minute
Radial runout: Max. 0.025mm (450g load)
Axial runout: 0.1~0.3mm (450g load)
Product display
| Motor Model Number | 130BYG350A | Inductance(mH) | 10.3 |
| Current(A) | 6.8 | Resistance(Ω) | 0.8 |
| Holdling Torque(N.m) | 24 | Rotor Inertia(Kg.cm2) | 24.5 |
| Operating Voltage (V) | 220 | Weight(Kg) | 8.8/10.8 |
| Motor Model Number | 130BYG350B | Inductance(mH) | 14.9 |
| Current(A) | 6.8 | Resistance(Ω) | 0.76 |
| Holdling Torque(N.m) | 28 | Rotor Inertia(Kg.cm2) | 32.3 |
| Operating Voltage (V) | 220 | Weight(Kg) | 12.5/14.5 |
| Motor Model Number | 130BYG350C | Inductance(mH) | 18.1 |
| Current(A) | 6.8 | Resistance(Ω) | 0.96 |
| Holdling Torque(N.m) | 35 | Rotor Inertia(Kg.cm2) | 42.5 |
| Operating Voltage (V) | 220 | Motor Weight(Kg) | 14.7/16.7 |
| Motor Model Number | 130BYG350D | Inductance(mH) | 21 |
| Rated Current(A) | 6.8 | Resistance(Ω) | 1.1 |
| Holdling Torque(N.m) | 50 | Rotor Inertia(Kg.cm2) | 50.3 |
| Operating Voltage (V) | 220 | Weight(Kg) | 17.8/19.8 |
Frequency torque characteristics
Wiring diagram
U red
white V Black W
| Serial number | 4 Core | 5Core | 7Core | 7-Core Brake |
| 1 | U | U | U | Braking |
| 2 | V | V | / | Braking |
| 3 | W | W | V | U |
| 4 | Grounding | / | / | V |
| 5 | / | Grounding | W | W |
| 6 | / | / | / | / |
| 7 | / | / | Grounding | Grounding |
| Note:Brake power supply DC24V pregarless of polarity. | ||||
Matters needing attention:
When motor mounted, be sure its front cover should be installed to the seam allowance position on , detention to the fit tolerance and strictly ensure that the concentricity of electrical motor axis with the load.
Hot Tags: nema 52 stepper motor, China nema 52 stepper motor manufacturers, suppliers, factory, aluminum extrusion 40x40, hvac vfd drive, cheap linear guide, extruded aluminum tubing profiles, linear guide rails, 1200mm linear rail
Previous
Brushless MachineYou Might Also Like
Send Inquiry